Code

In this article we look at the TMP102 digital sensor and we will connect it up to an Arduino – lets start with some technical info about this sensor The TMP102 device is a digital temperature sensor ideal for NTC/PTC …

In this article we look at the MPU-9255 and an Arduino, lets look at some information about the sensor MPU-9255 is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope …

The HY-SRF05 is an ultrasonic emitter/receiver used to measure distance with a precision of ~0.3cm. It sends out a 40 KHz square wave signal that reflects on objects in front of the sensor. This signal is then read back by …

In this article we connect an ADXL337 accelerometer to an Arduino Uno The ADXL337 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3g. It can measure …

Arduino and MCP3424 A/D converter example, lets look at the device. The MCP3424 is a four channel low-noise, high accuracy delta-sigma A/D converter with differential inputs and up to 18 bits of resolution. The on-board precision 2.048V reference voltage enables …

In this example we connect a LIS3DSH sensor to an Arduino. Lets look at the sensor The LIS3DSH is an ultra-low-power high-performance three-axis linear accelerometer belonging to the “nano” family with an embedded state machine that can be programmed to implement …

In this example we will connect a APDS-9960 sensor to an Arduino Uno Lets look at some information about the APDS-9960 The Broadcom APDS-9960 is a digital RGB, ambient light, proximity and gesture sensor device in a single 8-pin package. The device has …

The MCP3421 ADC can be used for various high accuracy analog-to-digital data conversion applications where ease of use, low power consumption and small footprint are major considerations.The MCP3421 is a single channel low-noise, high accuracy delta-sigma A/D converter with differential …