In this article we look at a tilt sensor – this time its the RPI-1031 and we will connect it to an Arduino The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back,…
shedboy71
-
-
In this article we look at another digital humidity sensor – this time its the SHTC1 and we will connect it to an Arduino The SHTC1 is a digital humidity sensor designed especially for high-volume consumer electronics applications. This humidity…
-
In this article we look at another acceleration sensor – this time its the BMA400 The BMA400 is the first real ultra-low power acceleration sensor without compromising on performance. Featuring 12-bit digital resolution, continuous measurement and a defined selectable bandwidth…
-
In this article we look at another sensor – this time its the LIS3MDL which is a 3-axis MEMS magnetic field sensor, digital output, I2C, SPI, low power mode, high performance The LIS3MDL has user-selectable full scales of ±4/±8/±12/±16 gauss.…
-
In this article we look at a digital geomagnetic sensor – this time its the BMM150 BMM150 is a low power and low noise 3-axis digital geomagnetic sensor to be used in compass applications. The 12-pin wafer level chip scale…
-
In this article we look at a pressure sensor – this time its the LPS25H The LPS25H is an ultra-compact absolute piezoresistive pressure sensor. It includes a monolithic sensing element and an IC interface able to take the information from…
-
Another expensive visit to Aliexpress made me find this sensor listed by one of the vendors – it is a BMP388 by Bosch Sensortec, so lets crack on and try this out with an Arduino Uno again On with the…
-
In this article we look at yet another humidity and temperature sensor from TI – this time its the HDC2080 which we will connect up to an Arduino Uno Lets look at some of the technical information and data from…
-
In this article we look at an FSR from Open Smart – here is the information I have found on this module FSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much it…
-
In this example we look at a MICS 5524 gas module The MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection; suitable also for indoor air quality monitoring; breath checker and early fire detection. Detectable…